MULTIPLE-SENSOR FAULT DIAGNOSIS IN A HEAT EXCHANGER USING SLIDING-MODE OBSERVERS BASED ON SUPER-TWISTING ALGORITHM

  • J. GarcÍa-Morales Posgrado en Ingeniería Electrónica del Centro Nacional de Investigación y Desarrollo Tecnológico
  • M. Adam-Medina Centro Nacional de Investigación y Desarrollo Tecnológico
  • R.F. Escobar Centro Nacional de Investigación y Desarrollo Tecnológico
  • C.M. Astorga-Zaragoza Centro Nacional de Investigación y Desarrollo Tecnológico
  • C.D. GarcÍa-Beltran Centro Nacional de Investigación y Desarrollo Tecnológico
Keywords: sliding-mode observer, fault diagnosis, heat exchanger

Abstract

This work presents a model-based fault diagnosis system for double pipe heat exchanger. The fault diagnosis system allows estimating and isolating the fault in one inlet and two outlet temperature sensors of the heat exchanger. The main goal presented in this work is the possibility of isolating two simultaneous failures in the temperature sensors. The fault diagnosis system was designed based on Super-Twisting Sliding-Mode Observer. Experimental results have shown the effectiveness of the proposed diagnosis system.

References

Adam, M., Escobar, R. F., D. Juárez, D., Guerrero, G. V. y López, B. (2013). Detección de fallas en un intercambiador de calor, utilizando observadores por modos deslizantes de segundo orden. Revista Mexicana de Ingeniería Química 12, 327-336.

Agudelo, C., Morant, A. F., Quiles, C. E., M. E, G., (2013). Integration of techniques for early fault detection and diagnosis for improving process safety: Application to a fluid catalytic cracking refinery process. Journal of Loss Prevention in the Process Industries 26, 660-665.

Bequette, B. (1998). Process Dynamics Modeling, Analysis, and Simulation. Springer, 471-478.

Boiko, I. y Fridman, L. (2004). Universal chattering test for the second order sliding modes algorithms. Proceedings of the 8th Workshop of Variable Structure Systems.

Boiko, I., Fridman L., Pisano A. y Usai E. (2007). Analysis of chattering in systems with secondorder sliding modes. IEEE Transactions on Automatic Control 52, 2085-2102.

Canh, L., Kwok, T., Carl, S. b., Romano, P. y Gorge, J. (2009). Fault Diagnosis and Failure Prognosis for Engineering Systems: A Global Perspective. 5th Annual IEEE Conference on Automation Science and Engineering Bangalore, India, August 22 -25, 2009

Dávila, J., Fridman, L. y Levant, A. (2005). Second-Order Sliding-Mode Observer for Mechanical Systems. IEEE Transactions on Automatic Control 50, 1785-1789.

Edwards, C. y Spurgeon, S. (1998). Sliding Mode Control theory and applications. Taylor and Francis.

Escobar, R. F., Astorga-Zaragoza, C. M., Téllez-Anguiano, A. C., Juárez-Romero, D., Hernández, J. A., y Guerrero-Ramírez, G. V. (2011). (2011). Sensor fault detection and isolation via high-gain observers: Application to a double-pipe heat exchanger. ISA Transaction 50, 480-486

Fazlur-Rahman, MHR. y Devanathan, R. (1994). Modelling and dynamic feedback linearisation of a heat exchanger model. In: Proceedings of the third IEEE conference on control applications, 1801-6.

Filippov, A. F., y Arscott, F. M. (1988). Differential equations with discontinuous righthand sides: control systems (Vol. 18). Springer Science & Business Media.

Fridman L. (2001). An averaging approach to chattering. IEEE Transactions on Automatic Control 46, 1260-1265.

Hamayun, M.T., Edwards, C. y Alwi, H. (2013). A fault tolerant control allocation scheme with output integral sliding modes. Automatica 49, 1830-1837.

Hangos, K., Bokor, J. y Szederkenyi G. (2004). Analysis and Control of Nonlinear Process Systems. Springer, 55-60.

Haskara, I. (1996). Sliding mode controllers and observers. Tesis de maestr´ıa. The Ohio State University, Columbus, Ohio. EU.

Laursen, M., Blanke, M., Dustegor, D., (2008). Fault diagnosis of a water for injection system using enhanced structural isolation. International Journal Applied Mathematics and Computation 18, 593-603.

Levant, A. (1998). Robust exact differentiation via sliding mode technique. Automatica 34, 379- 384.

Li-Ying H., Guang-Hong Y. (2013). Robust fault tolerant control based on sliding mode method for uncertain linear systems with quantization. ISA Transactions 52, 600-610.

Perruquetti, W. y Barbot J. P. (2002). Sliding Mode Control in Engineering. Marcel Dekker. 440- 437.

Rahman, R. Z., Yusof, R., Ismail, F. S., (2013). Model-based fault detection and diagnosis optimization for process control rig. 9th Asian Control Conference (ASCC), 1-6.

Rosas, P., Rosas, D. y Álvarez. J. (2011). Observación y Estimación en Tiempo Finito de una Clase de Sistemas no Lineales de Fase Mínima. Universidad Autónoma de Baja California Mexicali, B.C. México.

Sreedhar, R., Benito, F. y Glen, Y.M. (1993). Robust fault detection in nonlinear systems using sliding mode observers. Second IEEE Conference on Control Applications.

Téllez-Anguiano, A. C., Astorga-Zaragoza, C. M., Targui, B., Aguilera-González, A., J., R.- R., Adam-Medina, M., (2010). Experimental validation of a high-gain observer for composition estimation in an ethanol-water distillation column. Asia-Pacific Journal of Chemical Engineering 4, 942-952.

Tian,W., Sun, S. L., Guo, Q. J., (2013). Fault detection and diagnosis for distillation column using two-tier model. Canadian Journal of Chemical Engineering 91, 1671-1685.

Utkin, V. I. (1977). Variable structure systems with sliding modes. IEEE Transaction on Automatic Control 22, 212-222.

Varga, EI., Hangos, KM. y Szigeti, F. (1995). Controllability and observability of heat exchanger networks in the time-varying parameter case. Control Engineering Practice 3, 1409-1419.

Venkatasubramanian, V., Raghunathan, R., Kewen, Y. y Surya, K. (2002). A review of process fault detection and diagnosis part I: Quantitative model based methods. Computers and Chemical Engineering 27, 293-311.

Weyer, E., G., Szederkényi, y Hangos, K. (2000). Grey box fault detection of heat exchangers. Control Engineering Practice 8, 121-13.
Published
2020-02-06
How to Cite
GarcÍa-Morales, J., Adam-Medina, M., Escobar, R., Astorga-Zaragoza, C., & GarcÍa-Beltran, C. (2020). MULTIPLE-SENSOR FAULT DIAGNOSIS IN A HEAT EXCHANGER USING SLIDING-MODE OBSERVERS BASED ON SUPER-TWISTING ALGORITHM. Revista Mexicana De Ingeniería Química, 14(2), 553-565. Retrieved from http://www.rmiq.org/ojs311/index.php/rmiq/article/view/1287
Section
Simulation and control

Most read articles by the same author(s)